This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side. The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed metal. Features: Electronic Control 26″ Through-the-Wall AC with Electric Heat Capacity: Cooling-9,200btu / 8900btu – Heating-11,000btu / 9,000btu EER: 9.8 Dehumidifying: 81.6 pints / day ECO-Friendly Refrigerant: R-410A Fan speeds: 4 Speeds with Auto Modes: Cooling, Heating, Energy Saver, and Fan mode Electronic controls with digital display Digital Thermostat Remote control with LCD display Top air discharge Swing mode for Swinging Louvers Air Flow : 271CFM / 247CFM / 224CFM (High / Mid / Low) Easy out Washable and Reusable Filter Auto Restart feature: Auto turn on after power outage Up to 24 hours timer setting Auto-on or Auto-off Timer Indoor noise level (dBA): 56 Voltage / Frequency: 230-208 Volt / 60 Hz Rated Current: Cooling 4.7A / 4.4A – Heating 15A / 14A Input power (watt): Cooling 1200W / 1160W – Heating 3500W / 2900W Power cord: LCDI UL approved Unit dimension: 26″W x 21.125″D x 15.625″H Net weight (lbs): 79 Gross weight (lbs): 92 Optional Wall Sleeve Sold Separately
Price:
Recent Comments